ESP32 Sends weird stuff on I2C - PlatformIO Community

So i have a simple I2C use in my project but if i measure the data with a scope it shows absolutely something different than what I’m trying to send. Can anyone help? This is the decoded data on the scope in I2C Mode. TwoWire myBus = TwoWire(2); myBus.begin(I2C_SDA, I2C_SCL, 100000); myBus.beginTransmission(0x01); myBus.write(0xFF); myBus.endTransmission(1); That’s the stuff i have in the code…

Big ESP32 + SX127x topic part 3 - End Devices (Nodes) - The Things Network

PlatformIO is Broken for any esp32! - PlatformIO IDE - PlatformIO Community

Interfacing I2C LCD with ESP32

ESP32 sine wave with MCP4725 DAC, low frequency - espressif32 - PlatformIO Community

ESP32 OLED Display with Arduino IDE

DIYBMS v4 - diyBMS - OpenEnergyMonitor Community

ESP-NOW with ESP32: Send Data to Multiple Boards (one-to-many)

PCF8574 i2c digital I/O expander: Arduino, esp8266 and esp32, basic I/O and interrupt – Part 1 – Renzo Mischianti

Dual core ESP-32 development board, 2.4GHz dual mode development board. There are two touch buttons, one is reset, the other is enable module to enter

DORHEA 5PCS ESP32 Development Board Type-C USB WiFi + Bluetooth ESP-WROOM-32 2.4GHz Dual Core WiFi NodeMCU Processor ESP32-DevKitC-32