Cura sets nozzle temperature to 0 before a few final layers of the

I'm running a custom 3d printer with 2 extruders (2 in 1 out nozzle) and when I put in these settings, CURA automatically sets the temperature of nozzle to 0 even before the print is done. This results in the last final few prints not printing (cold extrusion). I'm attaching my configuration file

Cura Settings for Printing TPU Filament - Detailed Guide - 3D Print Gorilla

Temperature settings are not adopted · Issue #11461 · Ultimaker/Cura · GitHub

Unlock the power of variable line width with Ultimaker Cura 5.0 - UltiMaker

Screenshot of the CURA 4.7 slicer software window displaying notched

Incorrect nozzle temperature issues reported in #2942 not resolved in Cura 3.2.0 · Issue #3182 · Ultimaker/Cura · GitHub

Cura First Layer Settings: Initial Layer Simply Explained

Everything about nozzles with a different diameter - Original Prusa 3D Printers

Cura: Combing Mode – Simply Explained

Slicing parameters set for slicing the three parts in Cura 4.1.0

Retraction and Coasting, one pulls the other one pushes - My Stoopid Stuff

Quality setting for layer height based on nozzle diameter - UltiMaker Cura - UltiMaker Community of 3D Printing Experts

0.8 mm Nozzle Settings for Cura - Detailed Guide - 3D Print Gorilla

Cura not honoring initial layer temperatures when printing on A350 - Snapmaker 2.0 - Snapmaker: where creation happens